砂带机厂家专业人士对砂带机的优势介绍 Introduction given by professionals and manufactures of sand belt machines on its

砂带机厂家常说到：打磨，抛光，去毛刺，除锈，焊点处理……砂带机是处理这些工作的高手。

Sand belt machine manufacturers often say: grinding, polishing, deburring, rust removal, welding joint treatment can perform its best by using Sand belt machine.

砂带机具以下优势：

Sand belt machine has its advantages in the following:

砂带的磨料，比砂轮的磨料更加锋利，有更强的切削能力，所以，它的磨削效率高。

The abrasive of the grinding wheel has a stronger cutting ability so it has higher grinding efficiency.

砂带磨削温度低。砂带可以做到很长，所以砂带在旋转过程中有足够的冷却时间。这样被磨削的工件表面就不容易出现“烧伤”。

The grinding temperature of the belt is low the belt can be in operation for a very long time. Because is this the belt has enough cooling time during the rotation. By this way, the surface of the surface will not be prone to "burn". 

有的砂带磨料，有一定的自锐性。也就是砂带不会越磨越“钝”，新旧砂带都能保证相近的切削能力。比如：陶瓷刚玉砂带。

Some abrasive belts have a certain degree of self-sharpness. In other words, the sand belt will not become "blunt" after a long time period. Both new and old sand belts can be ensure same cutting capabilities. For example: ceramic corundum sand belt. 

砂带磨削震动小。砂带和砂带轮均是柔软材质，与工件接触时属于柔性接触，不会产生跳动。

The vibration caused by belt grinding is very small. The belt itself and belt’s pulley are both made of soft materials and fitted nicely in contact. It will not jump out of place during process. 

砂带磨削稳定性好。砂带本身质量轻，所有回转部件磨损极小，不会像砂轮一样出现动不平衡。磨削速度稳定，砂带很薄，即使磨损也不会出现像砂轮一样越磨越小，线速度基本不会发生变化。按时更换砂带即可。

The belt has a good grinding stability. The belt itself is light in weight and all rotary parts are extremely strong and durable. So there would not be any experience dynamic imbalance like the grinding wheel. The grinding speed is stable and the sand belt is very thin. If it’s worn out, it will not be visible it does not like grinding wheel which gets smaller and smaller. The linear speed will basically not change so instead just replace the belt will operate as normal again.

易于更换工艺。需要不同的表面工艺，只需更换砂带材质和目数即可，不需要更换整套设备。 

Easy to replace during the process. If different surface processes are required, just replace the material and a different belt. There is no need to replace the entire set of equipment.

使用砂带机前要注意以下内容：

Pay attention to the following procedure before using a sand belt machine:

1、工作前要紧穿工作服，戴好防护限镜，长发员工应把头发盘在头上，戴好工作帽方可操作。禁止戴围巾、手套、穿拖鞋操作机床。

Wear protective work clothes and protective glasses before work. Employees with Long-hair should tie their hair and hide within their protective helmets and wear it before they start work. It is prohibited to wear scarves, gloves, or slippers while operating the machine. 

2、不要移动或损环安装在机床上的警告标牌。非专业人员禁止维修本设备。

Do not remove or damage the warning signs posted on the machine. Non-professional personnel are prohibited from repairing the equipment. 

3、严禁操作人员站在砂带正面操作或多人围堆操作。

Operators are strictly prohibited from standing on the front of the sand belt or operating by multiple people. 

4、工作时，必须集中精力、严肃工作态度，不得与他人闲聊。

 While working in progress, you must concentrate and have a serious work attitude, and do not chat with others.

5、操作时头部尽量远离砂轮，眼睛要避开火花溅出方向，用力不得过大，防止工件打滑，当心伤手!

When operating, try to stay away from the grinding wheel. Eyes should avoid in direction of spark splashing. Do not use too much force to operate to prevent workpieces out of place or from slipping. Be careful not to hurt your hands! 

6、任何单位及个人不得拆除或改变任何安全保护装置，严禁使用防护罩不完好的砂带机。

No individual or personnel may remove or change any safety protection devices. It is strictly forbidden to use sand belt machines with incomplete protective covers. 

以上，就是我们总结的关于砂带机的优势与使用前注意事项，欢迎各位专家补充。

The above are the advantages and precautions we have summarized about the sand belt machine before use. We are welcome any comments and feedback given to us from all you experts.