直进式拉丝机的主要功能和适宜拉拔的材料 The main functions of the direct-inlet wire drawing machine and the materials mo

直进式拉丝机是消化吸收引进技术开发生产的一款拉丝机。其主要特点是卷筒采用窄缝式水冷，拉丝模采用直接水冷；冷却效果好；采用一级强力窄V带和一级平面二次包络蜗轮副传动，传动效率高、噪音低；采用全封闭防护系统，安全性好；采用气张力调谐，拉拔平稳。  

The direct-inlet type wire drawing machine is a wire drawing machine developed and produced by the introduction of digestion and absorption technology. Its main features are that the drum adopts narrow-slit water cooling and the wire drawing die adopts direct water cooling. Good cooling effect, first-stage strong narrow V-band and first-stage planar secondary envelope worm gear pair transmission with high transmission efficiency and low noise. Fully enclosed protection system, good safety, air tension tuning is used and smooth pulling is carried out.

不同于普通拉丝机，直进式拉丝机厂家采用交流变频控制技术或直流可编程序控制系统、屏幕显示，自动化程度高、操作方便、拉拔的产品质量高。适宜拉拔直径16mm以下的各种金属线材。  

Unlike ordinary wire drawing machines, direct-inlet wire drawing machines manufacturers use AC frequency conversion control technology or DC programmable control system and screen display. Which has high degree of automation, easy operation and high quality of pulling products. Suitable for pulling various metal wires with diameters below 16mm.

直进式拉丝机的主要功能包括误差0.1%准确计米；定长自动减速并停车; 断线检测并自动停车；任意卷筒正反点动及左右联动；各种故障信息及处理信息显示；各种运动信息监控。  

The main functions of the direct-input wire drawing machine include accurate meters measurement due to the error of 0.1%, automatic deceleration and stopping of fixed length. The automatic line detection and automatic stopping forward and reverse jog and left and right linkage of any reel. Display of various fault information and processing information and monitoring of various motion information.

并支持任意配模工艺，模具磨损后通过调谐自动补偿，不易断丝。并设有跳线装置可任意切除卷筒拉拔，以适应不同的工艺。可根据用户需要，以工业以太网为依托实行远程控制及远程诊断。  

It also supports any mould matching process. After the mould wears out, it is automatically compensated by tuning, making it difficult to break the wire. It is also equipped with a jumper device to cut the reel to pull out at will to adapt to different processes. Remote control and remote diagnosis can be implemented based on industrial Ethernet according to user needs.

直进式拉丝机适宜拉拔材料很多，包括了焊条、焊丝(气保焊丝、埋弧焊丝、药芯焊丝等）、钢丝（高、中、低碳钢丝，不锈钢丝，预应力钢丝，轮胎钢丝，胶管钢丝，弹簧钢丝，钢帘线等）、电线电览（铝包钢丝、铜丝、铝丝等）、合金丝等各种金属线材。

There are many suitable materials for drawing of straight-in wire drawing machines including welding rods, welding wires (gas-protected welding wires, submerged arc welding wires, flux-core welding wires, etc.), steel wires (high, medium and low carbon steel wires, stainless steel wires, prestressed steel wires, tire wires, hose wires, spring wires, steel cords, etc.); wires (aluminum-clad steel wires, copper wires, aluminum wires, etc.); alloy wires and other metal wires.