总结砂带机的使用方法 Summary of the sand belt machine instruction

砂带打磨机有什么用?带式砂光机可以为制造业生产他们想要的产品，但是不同价格和质量的带式砂光机所生产的产品质量也会不同。带式砂光机的结构是什么?操作砂带机时，砂带机厂家我们应该注意什么安全?

What is the use of sand belt machine? Sand Belt machine can produce products customer want for manufacturing but the quality of products produced by sand belt machines are different in prices and quality. What is the structure of a sand belt machine? What safety regulations should we pay attention to when operating a sand belt machine?

带式砂光机的结构: 　

Structure of belt sander:　

砂带打磨机包括砂带、包含砂带的砂带壳体、电机、包含电机的电机壳体、手柄、驱动轮、从动轮以及连接电机和驱动轮的驱动装置。马达壳体和手柄整体连接以形成一个单元，并且连接装置将单元主体连接到砂带壳体。

The sand belt machine includes containing a belt and a motor housing device.  Within the motor  housing device, it contains a motor, a handle, a drive wheel, a driven wheel and a drive device connecting the motor and the drive wheel. The motor housing and the handle are integrally connected to form a unit and the connecting means connects the unit body to the belt housing.

砂带打磨器的安全操作:

Safe operation of sand belt grinder 

1.启动砂光机前，检查砂轮和皮带罩是否完整牢固，砂纸是否损坏。打开前检查，直到使用前速度稳定。

1. Before starting the sander, check whether the grinding wheel belt cover are firm and complete. Check whether the sandpaper is also damaged. Then check before turning on until the speed is stable before use.

2 .研磨工件需要记住，人们必须在设备的一侧工作，同时尽量避免砂带表面发生旋转。

2.When grinding workpieces, it is necessary to remember that people must work on one side of the equipment while trying to avoid rotation of the belt surface.

3 .磨削时，工件应夹紧并夹紧，工件应慢慢接触砂纸。不要太快或太硬，应均均匀研磨。 

3. While grinding, the workpiece should be clamped tight and the workpiece should slowly contact the sandpaper. Don't be too fast or too hard make sure it grind evenly. 

4 .砂纸安装必须牢固，研磨物必须用钳子夹住，不能用手直接研磨。

4. The sandpaper must be installed firmly and the abrasive must be clamped with pliers and do not use bare hands directly. 

5 .不能在更大的振动轮上工作。

5. Cannot work on larger vibrating wheels. 6 .使用研磨机后，应立即切断电源。 6. After using the grinder, the power supply should be cut off immediately.

砂带砂光机的特点 :　

Features of sand belt machine　

节省人力成本，全自动砂带打磨机只需要一个人放料、启动机器、收集材料、关闭机器，不需要长时间观察操作，即一个人可以同时操作多台机器，大大节省了人力成本。

It saves labor costs: The fully automatic belt grinder only requires one person to discharge materials. The person only needs to start the machine, collect materials, and close the machine. It does not require long-term observation and operation. In conclusion, one person can operate multiple machines at the same time and that could save greatly on labor costs.

提高专业抛光工人的可替代性:只需提前调整研磨机的研磨数据，任何操作机器的人都可以研磨符合要求的产品，从而大大提高专业抛光工人的可替代性。

Improve the substitutability of professional polishing workers. It just adjust the grinding data of the grinding machine in advance, anyone operating the machine can grind products that meet the requirements, thereby greatly improving the substitutability of professional polishing workers.　　

保证产品质量:根据预设的研磨数据，研磨机的研磨效果均匀稳定，从而保证产品质量的稳定性。 

Ensure product quality: Based on the preset grinding data. The grinding effect of the grinding machine is uniform and stable. To ensure ability of product quality.

操作简单:磨床的操作面板、触摸屏和按钮相结合，简单易懂，更加人性化。

Simple operation instructions: The grinder's operating panel, touch screen and buttons are combined which makes it more simple user-friendly to use and easy to understand.

适用范围广:适用于不锈钢、铁、铜、铝、合金等所有金属制品的磨削、去毛刺和拉丝。

Wide range of scope application: suitable for grinding, deburring and wire drawing of all metal products such as stainless steel, iron, copper, aluminum, alloys, etc.

多样的研磨效果:砂带打磨机的摆动模式可调整为上/下/左/右/上/下/左/右，以满足大多数研磨效果要求。可定制:根据客户要求，可定制为水磨皮带机或配备防尘罩以减少灰尘。 　　

Variety grinding effects: The swing mode of the belt grinder can be adjusted to upper/down/left/right/up/down/left/right to meet most grinding effect requirements. Customization: According to customer requirements, a water-mill belt machine can be customized or equipped with a dust cover to reduce dust.

砂带砂光机的使用方法 ：　　

1 .在使用气动打磨机之前，仔细检查打磨机的所有部件，看它们是否完好和松动。之后，检查砂轮是否损坏或潮湿，然后牢固安装砂轮。 　　

2 .磨床电源插座必须装有漏电开关装置，并仔细检查电源线是否损坏。接通电源后，您不能直接开始工作，但您应该启动机器并提前运行，以查看研磨机的研磨件是否正常运行。此外，应邀请专门人员检查和更换碳刷。确认没有异常后，我们就可以开始工作了。 　　

3 .气动研磨机运行时，严禁任何人或易燃易爆物品进入其研磨和切割方向。为了避免危险。打磨机工作时，周围的地面应保持清洁。按照说明正确操作机器。用研磨机研磨时，强度应为均。发生粘连时，应立即提起研磨机。当研磨机长时间使用时，机器的温度会上升，当有热手时，它不能继续工作。为了避免损坏机器。