辊模拉丝设备如何安全生产？How to safely use the roller mould wire drawing equipment during production？

MK.COM是一种可累积的无滑动干式连续拉丝机。在拉拔过程中，轧辊圆周方向钢丝和轧辊表面不会沿轧辊圆周方向相对滑动，表面磨损量相对较小，如果中间轧辊暂时停止，则下一卷可以根据适当的剂量工作一段时间。今天向大家详细介绍辊模拉丝设备如何安全生产？

Rolling die wire drawing machine is a cumulative, non-sliding, dry continuous wire drawing machine. During the drawing process, the steel wire and the surface of the roll circumferential direction will not slide relative to each other along the roll circumferential direction and the surface wear and tear is relatively small. If the intermediate roll is temporarily stopped, how would you manage the production rate and time period. Today I will introduce to you in detail how to produce roller mould wire drawing equipment safely?

滚轴模具绘图装置是由多人头发组成的小型连续生产设备，可以一次性冷藏到想要电线的规格，生产力很高。但是，随着每一步的拉伸，导线的钢丝直径会发生变化，因此，每个拉拔头工作线速度也必须发生变化。根据拉伸模具配置，每个拉拔头的拉拔速度也应发生变化。拉拔速度的标准是，即使以下公式成立，每分钟通过模具的导线溢出体积也不会改变。R2v1=r2v2 r:绞线直径 v1:绞线速度 R:3360绞线直径 v2:绞线外部的绞线速度拉动中的每个电缆头的操作速度,均以上述公式为基础。

The roller mould drawing device is a small continuous production equipment composed of group of multiple people. It can be decenated to the specifications of the desired wires and it can be  very productive. However, as each step of stretching, the wire diameter of the wire changes, so the working line speed of each pull will also change. Depending on the tension mould configuration, the pulling speed of each pulling head should also vary. The standard for pulling speed also comply even if the following formula is true, the volume of wire overflowing through the mould will not change every minute. R2v1=r2v2.r: stranded wire diameter 、v1: stranded wire speed 、R3360 ：stranded wire diameter、v2: stranded wire speed outside the stranded wire. The operating speed of each cable head in the pulling is based on the above formula.

但是上面的说明是基于正常状态、机器传输错误和机器传输间隔、启动、加速、减速、停止等动态操作过程中每个人头发不同步的理想状态。因此，目前大多数垂直导线洗涤器都有张力传感器，动态测量每个人头部之间的导线张力，将张力转换为标准，使用标准信号反馈速度调节。采用吸收消化技术开发的高级牵引机，可以拔出14毫米以下的多种金属线。弹簧丝、绳丝、弦丝、轮胎线圈丝、药师丝、煤气丝、铝丝、预应力丝、软管丝和各种类型的低丝。

However, the above description is based on the ideal state that every person synchronizing  during dynamic operations. Such as normal state, machine transmission errors and machine transmission intervals, startup, acceleration, deceleration, and stop. Therefore, most vertical wire scrubbers currently have tension sensors that dynamically measure the wire tension between each person's head, convert the tension into standard, and adjust using standard signal feedback speed. Advanced traction machines developed using absorption and digestion technology can pull out various metal wires below 14 mm. Spring wire, rope wire, string wire, tire coil wire, pharmacist wire, gas wire, aluminum wire, prestressed wire, hose wire and various types of low wire.

换句话说，保证直线刷。该模型具有结构简单、操作方便、维护方便、制造成本低等优点，有一定的红线系数，电线体积短维护时间长，有助于电线的充分冷却。但是，线材材料流道多不仅会增加线材的弯曲次数，还会因为卷筒的乘积、线材在拉拔过程中沿着自身轴扭曲，严重影响线材的内部和表面质量。

In other words, ensure straight input. This model has the advantages of simple structure, convenient operation, convenient maintenance and low manufacturing cost. It has a certain red line coefficient. The wire volume is short and the maintenance time is long, which helps fully to  cool the wire. However, most wire material runners will not only increase the number of bending times of wire but will also cause the product of the reel and the twisting of the wire along its own axis during the drawing process. Which can seriously affecting the internal and surface quality of the wire.